Copyright (c) 1992-2009 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 7.2-STABLE #11: Sat Jun 6 17:59:50 JST 2009 root@www.heimat.gr.jp:/usr/obj/usr/src/sys/HEIMAT WARNING: WITNESS option enabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xffffffff80e1f000. Preloaded elf obj module "/boot/kernel/aio.ko" at 0xffffffff80e1f1d0. Preloaded elf obj module "/boot/kernel/ichwd.ko" at 0xffffffff80e1f7f8. Preloaded elf obj module "/boot/kernel/hwpmc.ko" at 0xffffffff80e1fce0. link_elf_obj: symbol linker_hwpmc_list_objects undefined KLD file hwpmc.ko - could not finalize loading Calibrating clock(s) ... i8254 clock: 1044112 Hz 1044112 Hz differs from default of 1193182 Hz by more than 1% Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2280254150 Hz CPU: Intel(R) Celeron(R) CPU 440 @ 2.00GHz (2280.25-MHz K8-class CPU) Origin = "GenuineIntel" Id = 0x10661 Stepping = 1 Features=0xafebfbff Features2=0xe31d AMD Features=0x20100800 AMD Features2=0x1 usable memory = 6418247680 (6120 MB) Physical memory chunk(s): 0x0000000000001000 - 0x000000000009bfff, 634880 bytes (155 pages) 0x0000000000e50000 - 0x00000000c2b83fff, 3251847168 bytes (793908 pages) 0x0000000100000000 - 0x00000001affebfff, 2952708096 bytes (720876 pages) avail memory = 6179917824 (5893 MB) ACPI APIC Table: APIC: CPU 0 has ACPI ID 1 ULE: setup cpu group 0 ULE: setup cpu 0 ULE: adding cpu 0 to group 0: cpus 1 mask 0x1 ACPI: RSDP @ 0x0xf9910/0x0024 (v 2 ACPIAM) ACPI: XSDT @ 0x0xcf6a0100/0x0054 (v 1 NEC DT000020 0x00050000 MSFT 0x20051117) ACPI: FACP @ 0x0xcf6a0290/0x00F4 (v 3 NEC DT000020 0x00050000 MSFT 0x20051117) ACPI: DSDT @ 0x0xcf6a05c0/0x576B (v 2 NEC DT000020 0x00050000 INTL 0x20051117) ACPI: FACS @ 0x0xcf6ae000/0x0040 ACPI: APIC @ 0x0xcf6a0390/0x006C (v 1 NEC DT000020 0x00050000 MSFT 0x20051117) ACPI: MCFG @ 0x0xcf6a0400/0x003C (v 1 NEC DT000020 0x00050000 MSFT 0x20051117) ACPI: OEMB @ 0x0xcf6ae040/0x0061 (v 1 NEC DT000020 0x00050000 MSFT 0x20051117) ACPI: HPET @ 0x0xcf6a5d30/0x0038 (v 1 NEC DT000020 0x00050000 MSFT 0x20051117) ACPI: GSCI @ 0x0xcf6ae0b0/0x2024 (v 1 NEC DT000020 0x00000001 MSFT 0x20051117) MADT: Found IO APIC ID 1, Interrupt 0 at 0xfec00000 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x00000000 VER: 0x00050014 LDR: 0x00000000 DFR: 0xffffffff lint0: 0x00010700 lint1: 0x00000400 TPR: 0x00000000 SVR: 0x000001ff timer: 0x000100ef therm: 0x00010000 err: 0x0001000f pcm: 0x00010000 wlan: <802.11 Link Layer> wlan_amrr: null: random: nfslock: pseudo-device kbd: new array size 4 kbd1 at kbdmux0 mem: io: ichwd module loaded hptrr: RocketRAID 17xx/2xxx SATA controller driver v1.2 (Jun 6 2009 17:59:35) acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] acpi0: [ITHREAD] acpi0: Power Button (fixed) AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.IELK.RXA0 -> bus 0 dev 0 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.FHR0 -> bus 0 dev 31 func 0 AcpiOsDerivePciId: \\_SB_.PCI0.SBRG.PIX0 -> bus 0 dev 31 func 0 acpi0: reservation of 0, a0000 (3) failed acpi0: reservation of 100000, cf600000 (3) failed ACPI timer: 0/3604 1/1 1/1 1/1 0/3616 1/1 1/1 0/3608 1/1 1/1 -> 7 Timecounter "ACPI-safe" frequency 3579545 Hz quality 850 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x808-0x80b on acpi0 pci_link0: Index IRQ Rtd Ref IRQs Initial Probe 0 10 N 0 3 4 6 7 10 11 12 14 15 Validation 0 10 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link1: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 5 Validation 0 255 N 0 5 After Disable 0 255 N 0 5 pci_link2: Index IRQ Rtd Ref IRQs Initial Probe 0 7 N 0 3 4 6 7 10 11 12 14 15 Validation 0 7 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link3: Index IRQ Rtd Ref IRQs Initial Probe 0 11 N 0 3 4 6 7 10 11 12 14 15 Validation 0 11 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link4: Index IRQ Rtd Ref IRQs Initial Probe 0 15 N 0 3 4 6 7 10 11 12 14 15 Validation 0 15 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link5: Index IRQ Rtd Ref IRQs Initial Probe 0 255 N 0 3 4 6 7 10 11 12 14 15 Validation 0 255 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link6: Index IRQ Rtd Ref IRQs Initial Probe 0 14 N 0 3 4 6 7 10 11 12 14 15 Validation 0 14 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 pci_link7: Index IRQ Rtd Ref IRQs Initial Probe 0 3 N 0 3 4 6 7 10 11 12 14 15 Validation 0 3 N 0 3 4 6 7 10 11 12 14 15 After Disable 0 255 N 0 3 4 6 7 10 11 12 14 15 acpi_hpet0: iomem 0xfed00000-0xfed003ff on acpi0 acpi_hpet0: vend: 0x8086 rev: 0x1 num: 3 hz: 14318180 opts: legacy_route 64-bit Timecounter "HPET" frequency 14318180 Hz quality 900 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pci0: domain=0, physical bus=0 found-> vendor=0x8086, dev=0x29c0, revid=0x02 domain=0, bus=0, slot=0, func=0 class=06-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x2090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x29c2, revid=0x02 domain=0, bus=0, slot=2, func=0 class=03-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0090, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D3 current D0 MSI supports 1 message map[10]: type Memory, range 32, base 0xfeb80000, size 19, enabled map[14]: type I/O Port, range 32, base 0xdc00, size 3, enabled map[18]: type Prefetchable Memory, range 32, base 0xd0000000, size 28, enabled map[1c]: type Memory, range 32, base 0xfea00000, size 20, enabled pcib0: matched entry for 0.2.INTA pcib0: slot 2 INTA hardwired to IRQ 16 found-> vendor=0x8086, dev=0x294c, revid=0x02 domain=0, bus=0, slot=25, func=0 class=02-00-00, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=15 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 32, base 0xfeb40000, size 17, enabled map[14]: type Memory, range 32, base 0xfeb7b000, size 12, enabled map[18]: type I/O Port, range 32, base 0xd880, size 5, enabled pcib0: matched entry for 0.25.INTA pcib0: slot 25 INTA hardwired to IRQ 20 found-> vendor=0x8086, dev=0x293e, revid=0x02 domain=0, bus=0, slot=27, func=0 class=04-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0010, cachelnsz=8 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=14 powerspec 2 supports D0 D3 current D0 MSI supports 1 message, 64 bit map[10]: type Memory, range 64, base 0xfeb74000, size 14, enabled pcib0: matched entry for 0.27.INTA pcib0: slot 27 INTA hardwired to IRQ 22 found-> vendor=0x8086, dev=0x2934, revid=0x02 domain=0, bus=0, slot=29, func=0 class=0c-03-00, hdrtype=0x00, mfdev=1 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 map[20]: type I/O Port, range 32, base 0xd800, size 5, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x2935, revid=0x02 domain=0, bus=0, slot=29, func=1 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 map[20]: type I/O Port, range 32, base 0xd480, size 5, enabled pcib0: matched entry for 0.29.INTB pcib0: slot 29 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2936, revid=0x02 domain=0, bus=0, slot=29, func=2 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[20]: type I/O Port, range 32, base 0xd400, size 5, enabled pcib0: matched entry for 0.29.INTC pcib0: slot 29 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2939, revid=0x02 domain=0, bus=0, slot=29, func=3 class=0c-03-00, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=d, irq=10 map[20]: type I/O Port, range 32, base 0xd080, size 5, enabled pcib0: matched entry for 0.29.INTD pcib0: slot 29 INTD hardwired to IRQ 16 found-> vendor=0x8086, dev=0x293a, revid=0x02 domain=0, bus=0, slot=29, func=7 class=0c-03-20, hdrtype=0x00, mfdev=0 cmdreg=0x0006, statreg=0x0290, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=3 powerspec 2 supports D0 D3 current D0 map[10]: type Memory, range 32, base 0xfeb7ac00, size 10, enabled pcib0: matched entry for 0.29.INTA pcib0: slot 29 INTA hardwired to IRQ 23 found-> vendor=0x8086, dev=0x244e, revid=0x92 domain=0, bus=0, slot=30, func=0 class=06-04-01, hdrtype=0x01, mfdev=0 cmdreg=0x0105, statreg=0x0010, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x02 (500 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2916, revid=0x02 domain=0, bus=0, slot=31, func=0 class=06-01-00, hdrtype=0x00, mfdev=1 cmdreg=0x0007, statreg=0x0210, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) found-> vendor=0x8086, dev=0x2920, revid=0x02 domain=0, bus=0, slot=31, func=2 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xd000, size 3, enabled map[14]: type I/O Port, range 32, base 0xcc00, size 2, enabled map[18]: type I/O Port, range 32, base 0xc880, size 3, enabled map[1c]: type I/O Port, range 32, base 0xc800, size 2, enabled map[20]: type I/O Port, range 32, base 0xc480, size 4, enabled map[24]: type I/O Port, range 32, base 0xc400, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 found-> vendor=0x8086, dev=0x2930, revid=0x02 domain=0, bus=0, slot=31, func=3 class=0c-05-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=c, irq=7 map[10]: type Memory, range 64, base 0xfeb7a800, size 8, enabled map[20]: type I/O Port, range 32, base 0x400, size 5, enabled pcib0: matched entry for 0.31.INTC pcib0: slot 31 INTC hardwired to IRQ 18 found-> vendor=0x8086, dev=0x2926, revid=0x02 domain=0, bus=0, slot=31, func=5 class=01-01-85, hdrtype=0x00, mfdev=0 cmdreg=0x0005, statreg=0x02b0, cachelnsz=0 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=b, irq=11 powerspec 3 supports D0 D3 current D0 map[10]: type I/O Port, range 32, base 0xc000, size 3, enabled map[14]: type I/O Port, range 32, base 0xbc00, size 2, enabled map[18]: type I/O Port, range 32, base 0xb880, size 3, enabled map[1c]: type I/O Port, range 32, base 0xb800, size 2, enabled map[20]: type I/O Port, range 32, base 0xb480, size 4, enabled map[24]: type I/O Port, range 32, base 0xb400, size 4, enabled pcib0: matched entry for 0.31.INTB pcib0: slot 31 INTB hardwired to IRQ 19 vgapci0: port 0xdc00-0xdc07 mem 0xfeb80000-0xfebfffff,0xd0000000-0xdfffffff,0xfea00000-0xfeafffff irq 16 at device 2.0 on pci0 agp0: on vgapci0 vgapci0: Reserved 0x10000000 bytes for rid 0x18 type 3 at 0xd0000000 vgapci0: Reserved 0x80000 bytes for rid 0x10 type 3 at 0xfeb80000 vgapci0: Reserved 0x100000 bytes for rid 0x1c type 3 at 0xfea00000 agp0: detected 7164k stolen memory agp0: aperture size is 256M em0: port 0xd880-0xd89f mem 0xfeb40000-0xfeb5ffff,0xfeb7b000-0xfeb7bfff irq 20 at device 25.0 on pci0 em0: Reserved 0x20000 bytes for rid 0x10 type 3 at 0xfeb40000 em0: attempting to allocate 1 MSI vectors (1 supported) msi: routing MSI IRQ 256 to vector 49 em0: using IRQ 256 for MSI em0: Using MSI interrupt em0: Reserved 0x1000 bytes for rid 0x14 type 3 at 0xfeb7b000 em0: [FILTER] em0: bpf attached em0: Ethernet address: 00:21:85:a3:ca:08 pci0: at device 27.0 (no driver attached) uhci0: port 0xd800-0xd81f irq 23 at device 29.0 on pci0 uhci0: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd800 ioapic0: routing intpin 23 (PCI IRQ 23) to vector 50 uhci0: [GIANT-LOCKED] uhci0: [ITHREAD] usb0: on uhci0 usb0: USB revision 1.0 uhub0: on usb0 uhub0: 2 ports with 2 removable, self powered uhci1: port 0xd480-0xd49f irq 19 at device 29.1 on pci0 uhci1: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd480 ioapic0: routing intpin 19 (PCI IRQ 19) to vector 51 uhci1: [GIANT-LOCKED] uhci1: [ITHREAD] usb1: on uhci1 usb1: USB revision 1.0 uhub1: on usb1 uhub1: 2 ports with 2 removable, self powered uhci2: port 0xd400-0xd41f irq 18 at device 29.2 on pci0 uhci2: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd400 ioapic0: routing intpin 18 (PCI IRQ 18) to vector 52 uhci2: [GIANT-LOCKED] uhci2: [ITHREAD] usb2: on uhci2 usb2: USB revision 1.0 uhub2: on usb2 uhub2: 2 ports with 2 removable, self powered uhci3: port 0xd080-0xd09f irq 16 at device 29.3 on pci0 uhci3: Reserved 0x20 bytes for rid 0x20 type 4 at 0xd080 ioapic0: routing intpin 16 (PCI IRQ 16) to vector 53 uhci3: [GIANT-LOCKED] uhci3: [ITHREAD] usb3: on uhci3 usb3: USB revision 1.0 uhub3: on usb3 uhub3: 2 ports with 2 removable, self powered ehci0: mem 0xfeb7ac00-0xfeb7afff irq 23 at device 29.7 on pci0 ehci0: Reserved 0x400 bytes for rid 0x10 type 3 at 0xfeb7ac00 ehci0: [GIANT-LOCKED] ehci0: [ITHREAD] usb4: EHCI version 1.0 usb4: companion controllers, 2 ports each: usb0 usb1 usb2 usb3 usb4: on ehci0 usb4: USB revision 2.0 uhub4: on usb4 uhub4: 8 ports with 8 removable, self powered pcib1: at device 30.0 on pci0 pcib1: domain 0 pcib1: secondary bus 1 pcib1: subordinate bus 1 pcib1: I/O decode 0xe000-0xefff pcib1: no prefetched decode pcib1: Subtractively decoded bridge. pci1: on pcib1 pci1: domain=0, physical bus=1 found-> vendor=0x9710, dev=0x9805, revid=0x01 domain=0, bus=1, slot=0, func=0 class=07-80-00, hdrtype=0x00, mfdev=0 cmdreg=0x0003, statreg=0x0280, cachelnsz=8 (dwords) lattimer=0x40 (1920 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 map[10]: type I/O Port, range 32, base 0xec00, size 3, enabled pcib1: requested I/O range 0xec00-0xec07: in range map[14]: type I/O Port, range 32, base 0xe880, size 3, enabled pcib1: requested I/O range 0xe880-0xe887: in range map[18]: type I/O Port, range 32, base 0xe800, size 3, enabled pcib1: requested I/O range 0xe800-0xe807: in range map[1c]: type I/O Port, range 32, base 0xe480, size 3, enabled pcib1: requested I/O range 0xe480-0xe487: in range map[20]: type I/O Port, range 32, base 0xe400, size 3, enabled pcib1: requested I/O range 0xe400-0xe407: in range map[24]: type I/O Port, range 32, base 0xe080, size 4, enabled pcib1: requested I/O range 0xe080-0xe08f: in range pcib1: matched entry for 1.0.INTA pcib1: slot 0 INTA hardwired to IRQ 16 ppc0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xec00 ppc0: using extended I/O port range ppc0: EPP SPP ppc0: port 0xec00-0xec07,0xe880-0xe887,0xe800-0xe807,0xe480-0xe487,0xe400-0xe407,0xe080-0xe08f irq 16 at device 0.0 on pci1 ppc0: Generic chipset (EPP/NIBBLE) in COMPATIBLE mode ppbus0: on ppc0 ppbus0: [MPSAFE] ppbus0: [ITHREAD] ppbus0: IEEE1284 device found /NIBBLE/NIBBLE_ID/Extensibility Link Probing for PnP devices on ppbus0: ppbus0: PRINTER EJL,PR201-00,ESCP24J-84,ESCPSUPER-00,ESCPAGEJ-04 plip0: on ppbus0 plip0: WARNING: using obsoleted IFF_NEEDSGIANT flag plip0: bpf attached lpt0: on ppbus0 lpt0: Interrupt-driven port ppi0: on ppbus0 ppc0: [GIANT-LOCKED] ppc0: [ITHREAD] isab0: at device 31.0 on pci0 isa0: on isab0 atapci0: port 0xd000-0xd007,0xcc00-0xcc03,0xc880-0xc887,0xc800-0xc803,0xc480-0xc48f,0xc400-0xc40f irq 19 at device 31.2 on pci0 atapci0: Reserved 0x10 bytes for rid 0x20 type 4 at 0xc480 atapci0: [MPSAFE] atapci0: [ITHREAD] atapci0: Reserved 0x10 bytes for rid 0x24 type 4 at 0xc400 ata2: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x10 type 4 at 0xd000 atapci0: Reserved 0x4 bytes for rid 0x14 type 4 at 0xcc00 ata2: reset tp1 mask=03 ostat0=50 ostat1=00 ata2: stat0=0x50 err=0x01 lsb=0x00 msb=0x00 ata2: stat1=0x00 err=0x01 lsb=0x00 msb=0x00 ata2: reset tp2 stat0=50 stat1=00 devices=0x1 ata2: [MPSAFE] ata2: [ITHREAD] ata3: on atapci0 atapci0: Reserved 0x8 bytes for rid 0x18 type 4 at 0xc880 atapci0: Reserved 0x4 bytes for rid 0x1c type 4 at 0xc800 ata3: reset tp1 mask=03 ostat0=7f ostat1=50 ata3: stat0=0x7f err=0x00 lsb=0xff msb=0xff ata3: stat1=0x50 err=0x01 lsb=0x00 msb=0x00 ata3: reset tp2 stat0=7f stat1=50 devices=0x2 ata3: [MPSAFE] ata3: [ITHREAD] pci0: at device 31.3 (no driver attached) atapci1: port 0xc000-0xc007,0xbc00-0xbc03,0xb880-0xb887,0xb800-0xb803,0xb480-0xb48f,0xb400-0xb40f irq 19 at device 31.5 on pci0 atapci1: Reserved 0x10 bytes for rid 0x20 type 4 at 0xb480 atapci1: [MPSAFE] atapci1: [ITHREAD] atapci1: Reserved 0x10 bytes for rid 0x24 type 4 at 0xb400 ata4: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x10 type 4 at 0xc000 atapci1: Reserved 0x4 bytes for rid 0x14 type 4 at 0xbc00 ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: [MPSAFE] ata4: [ITHREAD] ata5: on atapci1 atapci1: Reserved 0x8 bytes for rid 0x18 type 4 at 0xb880 atapci1: Reserved 0x4 bytes for rid 0x1c type 4 at 0xb800 ata5: reset tp1 mask=03 ostat0=7f ostat1=7f ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat0=0x7f err=0xff lsb=0xff msb=0xff ata5: stat1=0x7f err=0xff lsb=0xff msb=0xff ata5: reset tp2 stat0=ff stat1=ff devices=0x0 ata5: [MPSAFE] ata5: [ITHREAD] acpi_button0: on acpi0 atkbdc0: port 0x60,0x64 irq 1 on acpi0 atkbd0: irq 1 on atkbdc0 kbd0 at atkbd0 atkbd: the current kbd controller command byte 0001 atkbd: keyboard ID 0xffffffff (1) atkbd: failed to reset the keyboard. kbd0: atkbd0, AT 84 (1), config:0x0, flags:0x3d0000 ioapic0: routing intpin 1 (ISA IRQ 1) to vector 54 atkbd0: [GIANT-LOCKED] atkbd0: [ITHREAD] psm0: unable to allocate IRQ cpu0: on acpi0 cpu0: switching to generic Cx mode p4tcc0: on cpu0 ex_isa_identify() atkbdc: atkbdc0 already exists; skipping it ppc: ppc0 already exists; skipping it ahc_isa_probe 11: ioport 0xbc00 alloc failed ahc_isa_probe 12: ioport 0xcc00 alloc failed ahc_isa_probe 13: ioport 0xdc00 alloc failed ahc_isa_probe 14: ioport 0xec00 alloc failed sc: sc0 already exists; skipping it vga: vga0 already exists; skipping it isab0: found ICH9 or equivalent chipset: Intel ICH9R watchdog timer isa_probe_children: disabling PnP devices isa_probe_children: probing non-PnP devices ichwd0: on isa0 isab0: found ICH9 or equivalent chipset: Intel ICH9R watchdog timer ichwd0: Intel ICH9R watchdog timer (ICH9 or equivalent) ichwd0: timer disabled fdc0 failed to probe at port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on isa0 sc0: at flags 0x100 on isa0 sc0: VGA <16 virtual consoles, flags=0x300> sc0: fb0, kbd1, terminal emulator: sc (syscons terminal) sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0: configured irq 4 not in bitmap of probed irqs 0 sio0: port may not be enabled sio0: irq maps: 0 0 0 0 sio0: probe failed test(s): 0 1 2 4 6 7 9 sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0 sio0: type 8250 or not responding ioapic0: routing intpin 4 (ISA IRQ 4) to vector 55 sio0: [FILTER] sio1: configured irq 3 not in bitmap of probed irqs 0 sio1: port may not be enabled sio1: irq maps: 0 0 0 0 sio1: probe failed test(s): 0 1 2 4 6 7 9 sio1 failed to probe at port 0x2f8-0x2ff irq 3 on isa0 sio2: not probed (disabled) sio3: not probed (disabled) vga0: at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0 isa_probe_children: probing PnP devices ukbd0: on uhub2 kbd2 at ukbd0 kbd2: ukbd0, generic (0), config:0x0, flags:0x3d0000 ums0: on uhub2 ums0: 5 buttons and Z dir. Device configuration finished. Reducing kern.maxvnodes 384898 -> 100000 procfs registered lapic: Divisor 2, Frequency 114012712 hz Timecounter "TSC" frequency 2280254150 Hz quality 800 Timecounters tick every 1.000 msec lo0: bpf attached hptrr: no controller detected. ata2-master: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad4: 78533MB at ata2-master SATA150 ad4: 160836480 sectors [159560C/16H/63S] 16 sectors/interrupt 1 depth queue GEOM: new disk ad4 ad4: Intel check1 failed ad4: Adaptec check1 failed ad4: LSI (v3) check1 failed ad4: LSI (v2) check1 failed ad4: FreeBSD check1 failed ata3-slave: pio=PIO4 wdma=WDMA2 udma=UDMA133 cable=40 wire ad7: 238475MB at ata3-slave SATA300 ad7: 488397168 sectors [484521C/16H/63S] 16 sectors/interrupt 1 depth queue ad7: Intel check1 failed ad7: Adaptec check1 failed ad7: LSI (v3) check1 failed GEOM: new disk ad7 ad7: LSI (v2) check1 failed ad7: FreeBSD check1 failed GEOM_LABEL: Label for provider ad4s1a is ufsid/49b6e88cfc9921d2. GEOM_LABEL: Label for provider ad4s1d is ufsid/49b6e8980d0a9131. GEOM_LABEL: Label for provider ad4s1e is ufsid/49b6e8950040edc7. GEOM_LABEL: Label for provider ad4s1f is ufsid/49b6e8951fba7f1d. GEOM_LABEL: Label for provider ad7s1 is ufsid/49b6e88c50bbe273. ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reinit done .. ata4: reiniting channel .. ata4: reset tp1 mask=03 ostat0=00 ostat1=00 ata4: stat0=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: stat1=0x00 err=0x01 lsb=0x14 msb=0xeb ata4: reset tp2 stat0=00 stat1=00 devices=0xc ata4: reinit done .. ata4-master: pio=PIO4 wdma=WDMA2 udma=UDMA100 cable=40 wire acd0: DVDROM drive at ata4 as master acd0: read 6890KB/s (6890KB/s), 256KB buffer, SATA150 acd0: Reads: CDR, CDRW, CDDA stream, DVDROM, DVDR, DVDRAM, packet acd0: Writes: acd0: Audio: play, 256 volume levels acd0: Mechanism: ejectable tray, unlocked acd0: Medium: no/blank disc ATA PseudoRAID loaded WARNING: WITNESS option enabled, expect reduced performance. Trying to mount root from ufs:/dev/ad4s1a start_init: trying /sbin/init GEOM_LABEL: Label ufsid/49b6e88cfc9921d2 removed. GEOM_LABEL: Label for provider ad4s1a is ufsid/49b6e88cfc9921d2. GEOM_LABEL: Label ufsid/49b6e88c50bbe273 removed. GEOM_LABEL: Label for provider ad7s1 is ufsid/49b6e88c50bbe273. GEOM_LABEL: Label ufsid/49b6e8950040edc7 removed. GEOM_LABEL: Label for provider ad4s1e is ufsid/49b6e8950040edc7. GEOM_LABEL: Label ufsid/49b6e8951fba7f1d removed. GEOM_LABEL: Label for provider ad4s1f is ufsid/49b6e8951fba7f1d. GEOM_LABEL: Label ufsid/49b6e8980d0a9131 removed. GEOM_LABEL: Label for provider ad4s1d is ufsid/49b6e8980d0a9131. GEOM_LABEL: Label ufsid/49b6e88cfc9921d2 removed. GEOM_LABEL: Label ufsid/49b6e88c50bbe273 removed. GEOM_LABEL: Label ufsid/49b6e8950040edc7 removed. GEOM_LABEL: Label ufsid/49b6e8951fba7f1d removed. GEOM_LABEL: Label ufsid/49b6e8980d0a9131 removed. em0: Link is up 1000 Mbps Full Duplex